Please wait while message is being sent...

BULK

BRUKS Back-On Truck Dump

BULK

BRUKS Back-On Truck Dump

The BRUKS Back-On Truck Dumper is used to efficiently and safely unload trucks containing free flowing bulk materials. The Back-On Truck Dumper is designed to receive and process large volumes of material without utilizing site manpower. The Back-On design is proven and has been employed in operations for many years handling a wide variety of material types.

  • Robust and reliable design
  • Proven safety record
  • Large installation base
  • Multiple designs to meet a variety of applications and materials
  • Commonly employed to replace other designs that are structurally inferior

Share

BRUKS Back-On Truck Dump

The BRUKS tipping platform has been designed to survive under extreme high use conditions typical of most processing facilities. Unlike others, the BRUKS platform has a life expectancy of 2,000,000 cycles. This will far exceed 25 years of full-time service.

The platform can be custom designed to handle a variety of lengths and weights. The platform is designed to raise to a maximum angle (65 degrees) causing the material to flow freely into the hopper. The full lift and lower cycle is completed in approximately 3.5 minutes.

BRUKS offers a compatible receiving hopper used to convey materials away from the truck dumper and onto the customer’s take-away conveyor. The live bottom design uses heavy duty class drag chain to efficiently convey the materials in mass through a shear gate prior to discharging onto the take-away conveyor. The hopper’s conveying capacity is controlled by chain speed and the adjustable shear gate opening. In typical operations these parameters are permanently established as part of the commissioning phase. By utilizing a VFD (by others) the customer will maintain the ability to fine tune reclaim capacities through chain speed control.

The BRUKS equipment is provided with a discharge hood that covers the head pulley of the hopper. This hood includes a mounting flange for the customer’s chute work leading to the take-away conveyor’s skirt board.

Dumping Platform

 

Length of Platform:

45 to 85

Ft

 

Lifting Weight Capacity:

Up to 180,000

Lbs

 

Platform Lift & Lower Time:

4

Minutes

 

Max Dumping Angle:

63

Degrees

 

Design Operating Wind Load:

50

Mph

 

Non-Operating Wind Load:

110

Mph

 

 

 

 

 

 

BRUKS Rockwood offers a 12 foot wide and a 16 foot wide hopper.

 

 

 

 

Receiving Hopper

12’ Hopper

16’ Hopper

Hopper Volume:

4,000

Ft3

6,000

Ft3

Hopper Width:

12

Ft

16

Ft

Hopper Length:

33

Ft

33

Ft

Material Output Flow:

180

Tons/hr

180

Tons/hr

Flow Control:

VFD Rated Motors

VFD Rated Motors

Box Chain :

Five(5) WDH-480

Seven(7) WDH-480

Material Flow Enhancers:
Where material clumping or bridging is a concern, the BRUKS hopper can be equipped with ancillary devices to improve material flow. A spike roll can be provided inside the hopper to break apart large clumps of material that may result in “frozen” or “high sap” conditions. The spike roll is designed to reduce the size of these clumps prior to shear gate. Another option for improved material flow is a levelling roll at the discharge head of the hopper. The levelling roll is designed to uniformly distribute material onto the take-away conveyor.

Dust Control:
In an application where dust control or mitigation is an issue. BRUKS platforms and hoppers can be equipment with containment devices or hoods that reduce and contain dust emissions.

  • Customer oriented engineering
  • Worldwide delivery
  • Turnkey planning including material transport, screening and storage technology
  • Implementation in existing plants
  • Parts consignment programs
  • Service and reliability programs
  • Installation
Bruks Siwertell logo_graded01.png

A BRUKS SIWERTELL Group Brand